Вопросы

У Вас есть вопросы по поводу автоматических Инструментов для шпатлевания и финишной отделки и Вы не знаете где найти ответы? Вышлите нам свой вопрос и наши эксперты ответят на него. Вы хотите знать какой инструмент наиболее подходит Вам для работы или  Вы ищете советы и методы по использования инструментов  -  мы поможем Вам. Помните – если у Вас возник какой-либо вопрос, многие из Ваших коллег наверняка задаются таким же вопросом. Поэтому каждый заданный Вами вопрос может потенциально помочь тысячам людей достичь более продуктивных результатов. Это сильно!

Некоторые вопросы и ответы доступны в данный момент только на английском языке.

    • Вопрос:

      Can I adjust the spring pressure on my TapeTech Power Assist™ Finishing Boxes?

    • Yes. There are three adjustments that can be set on the Power Assist™ arm that connects the spring to the radius plate of the TapeTech Power Assist™ Finishing Box...

      Прочитать больше

    • Вопрос:

      Is there a special cleaning adapter that can be used to clean the TapeTech Auto Taper, MudRunner® and Corner Applicators?

    • Keeping your Automatic Taping and Finishing tools clean is a key to proper operation and long tool life. An important part of cleaning the Automatic Tapers (04TT & 05TT), MudRunner® (14TT) and Corner Applicators (35TT & 50TT).

      TapeTech offers an EZ Clean Wash Adapter (#053808) that connects to hose nozzles that feature a threaded front end (e.g Gilmour 573TF). Just attach this adapter to your hose nozzle and then insert onto the filler adapter of the tools. Turn on the water, squeeze the trigger of the hose nozzle and quickly flush the joint compound out of the filler adapters of the tools without getting soaked! There are two adapters per package.

      These adapters, along with a hose nozzle, are also included as part of the 501B Taper Cleaning Kit and 501H1 Pump Cleaning Kit...

      Прочитать больше

    • Вопрос:

      Is there a recommended height for the blades above the skids?

    • The blades on TapeTech Finishing Boxes (Flat, EasyClean® and Power Assist™), Corner Finishers and Nail Spotters ...

      Прочитать больше

    • Вопрос:

      How do I prevent the tape from jamming on my automatic taper?

    • The jamming of the tape is most likely caused by some type of obstruction within the tape guide itself or at the pyramid blade area. Keep the tape guide area clean with water and a brush and be sure to lubricate with Ames Bazooka Oil. If there is a tape jam at the pyramid blade, simply release the blade spring (#050132F) and pull the blade and chain through the taper head. Then use a piece of thin metal band or strap to clean or remove any obstruction that is located in the tape guide or pyramid blade area of the taper head. Pull the blade chain back through the taper head and reattach the spring using the Key Ring (#059067).

      View the Schematic Drawings for the Automatic Tapers...

      Прочитать больше

    • Вопрос:

      The part that holds the advance needle keeps getting stuck at the top of the tape guide. How do I stop this from happening?

    • The Gooser Needle (the small needle that advances the tape) is attached to a white plastic tube called the Gooser Guide( part #054111F). If the Gooser Guide is getting stuck at the top of the Tape Guide, this area probably needs to be lubricated. Make sure to keep this area clean and free of dried joint compound and use Ames Bazooka Oil to keep the moving parts lubricated. Smooth operation of the Gooser Guide piece will ensure easy cutting and advancement of the tape.

      View the Schematic Drawings for the Automatic Tapers...

      Прочитать больше