Вопросы

У Вас есть вопросы по поводу автоматических Инструментов для шпатлевания и финишной отделки и Вы не знаете где найти ответы? Вышлите нам свой вопрос и наши эксперты ответят на него. Вы хотите знать какой инструмент наиболее подходит Вам для работы или  Вы ищете советы и методы по использования инструментов  -  мы поможем Вам. Помните – если у Вас возник какой-либо вопрос, многие из Ваших коллег наверняка задаются таким же вопросом. Поэтому каждый заданный Вами вопрос может потенциально помочь тысячам людей достичь более продуктивных результатов. Это сильно!

Некоторые вопросы и ответы доступны в данный момент только на английском языке.

    • Вопрос:

      My TapeTech Loading Pump will not prime or pump joint compound.

    • If your TapeTech Loading Pump - 72TT, 73TT, B74TT or B75TT - will not prime or pump the joint compound it is usually due to one of two possible causes.

      The first reason could be that the valve disc located just above the screen is blocked and cannot open to allow the joint compound to pass into the pump cylinder. The other reason is that debris or dried joint compound has collected in the foot valve screen and is blocking the flow of joint compound. 

      The best way to fix this issue is to spray water directly into the screen/foot valve to loosen and remove any material. If pressured water is not available, try placing the loading pump into a bucket of clean water, and pump water through the pump until it will prime. Drain the water and place the loading pump back into the bucket of joint compound and then prime with joint compound.

      TapeTech offers a convenient maintenance kit, 501H1...

      Прочитать больше