Preguntas

¿Tiene una pregunta sobre las herramientas automáticas de encintado y acabado y no sabe dónde encontrar la respuesta? Simplemente envíe su pregunta aquí y nuestros expertos le darán la respuesta. Tanto si desea saber qué herramienta es la adecuada para el trabajo como si está buscando consejos y técnicas, podemos ayudarle. Recuerde: si tiene una pregunta sobre algo, muchos de sus colegas probablemente tienen la misma pregunta. Por lo tanto, cada pregunta que usted haga puede ayudar potencialmente a miles de personas a aprender más y trabajar más productivamente. ¡Eso sí que es poderoso!

Algunas preguntas y respuestas sólo están disponibles en inglés en este momento.

    • Pregunta:

      I just finished a large job with my Bazooka Continuous Flow System and will not be using it again for one month. How should I maintain the pump during this time?

    • As with all ATF tools, we recommend that you always keep the tools clean. For the BAZOOKA Continuous Flow pump, you should thoroughly clean out the hopper, pump and hoses by pumping water through them. For more information, see Page 14 ...

      Leer más

    • Pregunta:

      Can I use commercial lubricants like WD-40 on my TapeTech tools?

    • There are many commercially available lubricant products on the market. Most are designed for specific uses. Our experience is that many lubricants can cause some of the rubber parts used in ATF to...

      Leer más

    • Pregunta:

      Can I use my MudRunner® to apply joint compound to outside corners when I'm applying paper-faced corner bead?

    • Yes! Applying joint compound to outside corners is easy using the TapeTech 14TT MudRunner® together with the TapeTech 16TT 90o Outside Corner Mud Head! Simply attach the Mud Head to your MudRunner® and apply joint compound directly to the outside corners! The Mud Heads produce a level, consistent layer of joint compound that is ideal for setting paper-faced corner bead. We recommend that you also use the TapeTech 17TT...

      Leer más

    • Pregunta:

      When I change the blades in my TapeTech Finishing Boxes, sometimes they do not remain fully seated into the brass blade carrier. How can I keep this from occurring?

    • Here’s a trick from the Expert: When installing a replacement blade into the TapeTech Flat, EasyClean™ or Power Assist™ finishing boxes, (or any finishing boxes) if you pinch the blade between your thumb and fore finger about 2” from each end of the blade and bend it very slightly, the blade will seat more securely in the holder. To find the right replacement blades for your model of TapeTech finishing box, please reference the Schematics...

      Leer más

    • Pregunta:

      When I am filling my TapeTech Finishing Boxes, the Filler Tube keeps falling out as I use the loading pump. Can you please advise how I can keep this from occurring?

    • It sounds like you’ve been doing a lot of work and the “O” Ring that is inside the 90T Filler Adapter is worn out. This “O” Ring holds the Filler Tube securely inside the Filler Adapter while you’re filling ATF tools with the 72TT loading pump...

      Leer más